Determination of Appropriate Mix Proportions for the Kenyan Blended Portland Cement Concrete Production

The Kenya’s vision 2030 seeks to address the rising needs of its population through infrastructure development. Reinforced concrete being the most commonly used construction material forms an integral part of this development strategy. The direct substitution of the ordinary Portland cements with the cheaper, lower strength, locally available blended Portland cements could be responsible for the production of poor quality concrete and contribute to the failure of several concrete buildings in the country. This paper presents findings of an experimental investigation on the appropriate mix proportions for the Kenyan blended Portland cement concrete. Key variables used in this study included the water/ cement ratio (x1), the cement/ total aggregates ratio (x2) and the fine aggregates/ coarse aggregates ratio (x3). The response was measured in terms of slump, compressive strengths at 7days, 14days and 28 days and density. Minitab 17 software was used in the design of experiments and results analysis based on Central Composite Design method. The investigation revealed that for a workable concrete with slump of ≥ 30mm, the appropriate mix ratios for the Kenyan blended Portland cement concrete are: 1:2.2:3.4 (w/c 0.6) for strength class C15 and 1:1.3:2.2 (w/c 0.5) for strength class C20. It was further noted that the different brands of blended Portland cement in the country had varying properties and thus produced concrete with different wet and hardened properties. None of the brands achieved the target design strength for strength class C25 and above. Therefore, the blended Portland cements may not be suitable for producing structural concrete strength class C 25 and above

Measurement of overall insecticidal effects in experimental hut trials

BACKGROUND: The 'overall insecticidal effect' is a key measure used to evaluate public health pesticides for indoor use in experimental hut trials. It depends on the proportion of mosquitoes that are killed out of those that enter the treated hut, intrinsic mortality in the control hut, and the ratio of mosquitoes entering the treatment hut to those entering the control hut. This paper critically examines the way the effect is defined, and discusses how it can be used to infer effectiveness of intervention programmes. FINDINGS: The overall insecticidal effect, as defined by the World Health Organization in 2006, can be negative when deterrence from entering the treated hut is high, even if all mosquitoes that enter are killed, wrongly suggesting that the insecticide enhances mosquito survival. Also in the absence of deterrence, even if the insecticide kills all mosquitoes in the treatment hut, the insecticidal effect is less than 100%, unless intrinsic mortality is nil. A proposed alternative definition for the measurement of the overall insecticidal effect has the desirable range of 0 to 1 (100%), provided mortality among non-repelled mosquitoes in the treated hut is less than the corresponding mortality in the control hut. This definition can be built upon to formulate the coverage-dependent insecticidal effectiveness of an intervention programme. Coverage-dependent population protection against feeding can be formulated similarly. CONCLUSIONS: This paper shows that the 2006 recommended quantity for measuring the overall insecticidal effect is problematic, and proposes an alternative quantity with more desirable propertie

Comparative Field Evaluation of Combinations of Long-Lasting Insecticide Treated Nets and Indoor Residual Spraying, Relative to Either Method Alone, for Malaria Prevention in an Area where the main Vector is Anopheles Arabiensis.

Long-lasting insecticidal nets (LLINs) and indoor residual spraying (IRS) are commonly used together in the same households to improve malaria control despite inconsistent evidence on whether such combinations actually offer better protection than nets alone or IRS alone. Comparative tests were conducted using experimental huts fitted with LLINs, untreated nets, IRS plus untreated nets, or combinations of LLINs and IRS, in an area where Anopheles arabiensis is the predominant malaria vector species. Three LLIN types, Olyset®, PermaNet 2.0® and Icon Life® nets and three IRS treatments, pirimiphos-methyl, DDT, and lambda cyhalothrin, were used singly or in combinations. We compared, number of mosquitoes entering huts, proportion and number killed, proportions prevented from blood-feeding, time when mosquitoes exited the huts, and proportions caught exiting. The tests were done for four months in dry season and another six months in wet season, each time using new intact nets. All the net types, used with or without IRS, prevented >99% of indoor mosquito bites. Adding PermaNet 2.0® and Icon Life®, but not Olyset® nets into huts with any IRS increased mortality of malaria vectors relative to IRS alone. However, of all IRS treatments, only pirimiphos-methyl significantly increased vector mortality relative to LLINs alone, though this increase was modest. Overall, median mortality of An. arabiensis caught in huts with any of the treatments did not exceed 29%. No treatment reduced entry of the vectors into huts, except for marginal reductions due to PermaNet 2.0® nets and DDT. More than 95% of all mosquitoes were caught in exit traps rather than inside huts. Where the main malaria vector is An. arabiensis, adding IRS into houses with intact pyrethroid LLINs does not enhance house-hold level protection except where the IRS employs non-pyrethroid insecticides such as pirimiphos-methyl, which can confer modest enhancements. In contrast, adding intact bednets onto IRS enhances protection by preventing mosquito blood-feeding (even if the nets are non-insecticidal) and by slightly increasing mosquito mortality (in case of LLINs). The primary mode of action of intact LLINs against An. arabiensis is clearly bite prevention rather than insecticidal activity. Therefore, where resources are limited, priority should be to ensure that everyone at risk consistently uses LLINs and that the nets are regularly replaced before being excessively torn. Measures that maximize bite prevention (e.g. proper net sizes to effectively cover sleeping spaces, stronger net fibres that resist tears and burns and net use practices that preserve net longevity), should be emphasized

Reflections on the 2021 World Malaria Report and the future of malaria control

The World Malaria Report, released in December 2021, reflects the unique challenges currently facing the global malaria community. The report showed the devastating toll of malaria, with an estimated 627,000 people losing their lives to the disease in 2020. The improved methodological approach used for calculating cause of death for young children revealed a systematic underestimation of disease burden over the past two decades; and that Africa has an even greater malaria crisis than previously known. While countries were able to prevent the worst-case scenarios, the disruptions due to the COVID-19 pandemic revealed how weak health systems and inadequate financing can limit the capacity of the continent to address the malaria challenge. African countries also face a convergence of biological threats that could redefine malaria control, notably widespread pyrethroid resistance and emerging resistance to artemisinin. Despite these challenges, there is cause for optimism in lessons learned from the COVID-19 pandemic, recent acceleration of cutting edge research and development, and new partnerships that encourage leadership from and ownership by affected countries. This article presents key insights from the 2021 World Malaria Report and reflections on the future trajectories: it was informed by an in-depth discussion with leading malaria experts from the World Health Organization (WHO), the Bill & Melinda Gates Foundation, and the U.S. President's Malaria Initiative (PMI). The discussion took place during the 34th edition of the Ifakara Master Classes, held virtually on December 15th, 2021

Unlocking the human factor to increase effectiveness and sustainability of malaria vector control

BACKGROUND: Progress in the fight against malaria has stalled in recent years, highlighting the importance of new interventions and tailored approaches. A critical factor that must be considered across contexts and interventions is human behaviour. MAIN TEXT: Factors such as acceptance of insecticide-treated nets (ITNs) and indoor residual spraying (IRS), ability and willingness to consistently use and appropriately care for ITNs and refraining from post-spray wall modifications can all impact the success of core vector control interventions. Understanding factors that can drive or inhibit these behaviours can contribute to improved social and behaviour change strategies and in turn, improved outcomes. Likewise, patterns of nighttime activities can reveal specific gaps in protection that cannot be filled by core interventions and inform development and deployment of complementary tools that meet people's needs and preferences. There is an opportunity to increase use of approaches such as human-centred design to engage affected communities more actively in identifying and developing sustainable solutions that meet their needs and lifestyles. Integration of social and behavioural research with entomological and epidemiological evaluations will provide a more complete picture of malaria transmission dynamics and inform improved targeting of context-appropriate interventions. Finally, for gains to be maintained, interventions must be rooted within systems that support long-term success. This includes a movement toward more sustainable vector control solutions, increased decision-making and ownership of research, implementation, and strategy development at the country level, and inclusive approaches that ensure all men, women, boys, and girls are engaged as part of the solution. CONCLUSIONS: No matter how efficacious, a tool will remain ineffective if communities do not engage with it or use it regularly. Entering the next decade in the fight against malaria there is a critical opportunity to elevate the role of social and behaviour change to increase the impact and sustainability of malaria control and elimination efforts. This includes removing social and structural barriers to use of existing tools at all levels, human-centred and inclusive design and implementation of new tools, and movement toward long-term solutions led by affected communities

Factors Influencing Adoption of Management and Control Technologies for Prosopis juliflora in Marigat, Baringo County, Kenya

Prosopis juliflora is an invasive woody plant that was introduced to Marigat Sub County of Baringo County in 1970s and over the years its spread has altered the livelihoods of the pastoral communities who are the majority in most of the affected areas. This is because  Prosopis juliflora invasion has reduced available dry season grazing fields, chocked river banks and interfered with access roads.  To control its spread several management and control technologies were promoted in Marigat Sub-County in early 2004 that included clearing and planting pasture, charcoal production and killing of cut stumps with chemicals among others. However, the interventions have not yielded the desired results for the species has continued to spread into newer areas and intensifying their presence in already invaded areas. A study was initiated in 2017 to determine the factors influenced the local households to adopt the promoted management and control technologies in Marigat Sub-county one of the areas of original introduction and most affected by the infestations. The study was done through socio-ecological survey using questionnaires and checklist administered to 337 households. The factors considered were Socio-economic (education, land size income) and demographic (gender, age, household size). Data collected was then processed and analyzed using descriptive and inferential statistics of SPSS. The inferential tools used were chi-square analysis, regression and correlation analysis and Pearson Moment Correlation analysis. The results showed land size, incomes from Prosopis products, age and household size significantly influenced adoption of management and control technologies for Prosopis in the study area. The adoption rates association direction depended mostly on labour availability and incomes to hire extra labour for undertake the arduous job of Prosopis clearing and control of reinvasions. Level of education of the respondents had no significant effect on the adoption rates of the various control measures. Keywords: Adoption, Prosopis juliflora, Management, Invasion and Househol

Correlations Between Household Occupancy and Malaria Vector Biting Risk in Rural Tanzanian Villages: Implications for High-resolution Spatial Targeting of Control Interventions.

Fine-scale targeting of interventions is increasingly important where epidemiological disease profiles depict high geographical stratifications. This study verified correlations between household biomass and mosquito house-entry using experimental hut studies, and then demonstrated how geographical foci of mosquito biting risk can be readily identified based on spatial distributions of household occupancies in villages. A controlled 4 × 4 Latin square experiment was conducted in rural Tanzania, in which no, one, three or six adult male volunteers slept under intact bed nets, in experimental huts. Mosquitoes entering the huts were caught using exit interception traps on eaves and windows. Separately, monthly mosquito collections were conducted in 96 randomly selected households in three villages using CDC light traps between March-2012 and November-2013. The number of people sleeping in the houses and other household and environmental characteristics were recorded. ArcGIS 10 (ESRI-USA) spatial analyst tool, Gi* Ord Statistic was used to analyse clustering of vector densities and household occupancy. The densities of all mosquito genera increased in huts with one, three or six volunteers, relative to huts with no volunteers, and direct linear correlations within tested ranges (P < 0.001). Significant geographical clustering of indoor densities of malaria vectors, Anopheles arabiensis and Anopheles funestus, but not Culex or Mansonia species occurred in locations where households with highest occupancy were also most clustered (Gi* P ≤ 0.05, and Gi* Z-score ≥1.96). This study demonstrates strong correlations between household occupancy and malaria vector densities in households, but also spatial correlations of these variables within and between villages in rural southeastern Tanzania. Fine-scale clustering of indoor densities of vectors within and between villages occurs in locations where houses with highest occupancy are also clustered. The study indicates potential for using household census data to preliminarily identify households with greatest Anopheles mosquito biting risk

Using a New Odour-Baited Device to Explore Options for Luring and Killing Outdoor-Biting Malaria Vectors: A Report on Design and Field Evaluation of the Mosquito Landing Box.

Mosquitoes that bite people outdoors can sustain malaria transmission even where effective indoor interventions such as bednets or indoor residual spraying are already widely used. Outdoor tools may therefore complement current indoor measures and improve control. We developed and evaluated a prototype mosquito control device, the 'Mosquito Landing Box' (MLB), which is baited with human odours and treated with mosquitocidal agents. The findings are used to explore technical options and challenges relevant to luring and killing outdoor-biting malaria vectors in endemic settings. Field experiments were conducted in Tanzania to assess if wild host-seeking mosquitoes 1) visited the MLBs, 2) stayed long or left shortly after arrival at the device, 3) visited the devices at times when humans were also outdoors, and 4) could be killed by contaminants applied on the devices. Odours suctioned from volunteer-occupied tents were also evaluated as a potential low-cost bait, by comparing baited and unbaited MLBs. There were significantly more Anopheles arabiensis, An. funestus, Culex and Mansonia mosquitoes visiting baited MLB than unbaited controls (P<=0.028). Increasing sampling frequency from every 120 min to 60 and 30 min led to an increase in vector catches of up to 3.6 fold (P<=0.002), indicating that many mosquitoes visited the device but left shortly afterwards. Outdoor host-seeking activity of malaria vectors peaked between 7:30 and 10:30pm, and between 4:30 and 6:00am, matching durations when locals were also outdoors. Maximum mortality of mosquitoes visiting MLBs sprayed or painted with formulations of candidate mosquitocidal agent (pirimiphos-methyl) was 51%. Odours from volunteer occupied tents attracted significantly more mosquitoes to MLBs than controls (P<0.001). While odour-baited devices such as the MLBs clearly have potential against outdoor-biting mosquitoes in communities where LLINs are used, candidate contaminants must be those that are effective at ultra-low doses even after short contact periods, since important vector species such as An. arabiensis make only brief visits to such devices. Natural human odours suctioned from occupied dwellings could constitute affordable sources of attractants to supplement odour baits for the devices. The killing agents used should be environmentally safe, long lasting, and have different modes of action (other than pyrethroids as used on LLINs), to curb the risk of physiological insecticide resistance

Evaluation of different deployment strategies for larviciding to control malaria: a simulation study

BACKGROUND: Larviciding against malaria vectors in Africa has been limited to indoor residual spraying and insecticide-treated nets, but is increasingly being considered by some countries as a complementary strategy. However, despite progress towards improved larvicides and new tools for mapping or treating mosquito-breeding sites, little is known about the optimal deployment strategies for larviciding in different transmission and seasonality settings. METHODS: A malaria transmission model, OpenMalaria, was used to simulate varying larviciding strategies and their impact on host-seeking mosquito densities, entomological inoculation rate (EIR) and malaria prevalence. Variations in coverage, duration, frequency, and timing of larviciding were simulated for three transmission intensities and four transmission seasonality profiles. Malaria transmission was assumed to follow rainfall with a lag of one month. Theoretical sub-Saharan African settings with Anopheles gambiae as the dominant vector were chosen to explore impact. Relative reduction compared to no larviciding was predicted for each indicator during the simulated larviciding period. RESULTS: Larviciding immediately reduced the predicted host-seeking mosquito densities and EIRs to a maximum that approached or exceeded the simulated coverage. Reduction in prevalence was delayed by approximately one month. The relative reduction in prevalence was up to four times higher at low than high transmission. Reducing larviciding frequency (i.e., from every 5 to 10 days) resulted in substantial loss in effectiveness (54, 45 and 53% loss of impact for host-seeking mosquito densities, EIR and prevalence, respectively). In seasonal settings the most effective timing of larviciding was during or at the beginning of the rainy season and least impactful during the dry season, assuming larviciding deployment for four months. CONCLUSION: The results highlight the critical role of deployment strategies on the impact of larviciding. Overall, larviciding would be more effective in settings with low and seasonal transmission, and at the beginning and during the peak densities of the target species populations. For maximum impact, implementers should consider the practical ranges of coverage, duration, frequency, and timing of larviciding in their respective contexts. More operational data and improved calibration would enable models to become a practical tool to support malaria control programmes in developing larviciding strategies that account for the diversity of contexts